Thursday, January 26, 2017

The Wholehearted Block

I give you my heart, treat it kindly..........



The 3 seam #wholeheartedblock Tutorial, from my heart to your hands.

This heart can be made to whatever size you need requiring only 3 seams in its construction. It is suitable for use with solids and prints.

What you will need:
background fabric
fabric for your heart
sewing machine and 1/4" foot
thread for piecing and thread for quilting
iron and ironing board
sharp scissors
glue for basting
batting and backing, or whatever additional supplies you need to complete your heart project.


Choose your background fabric cutting it a inch or so bigger than your desired finished measurements.

Cut your background fabric (in half; in thirds) length-wise where you want to have your heart reside. (I chose a 9 x 8" of fabric for my project and cut it (almost) in half. I used scissors to accomplish this since the fabric piece was small. A rotary cutter and mat work well for larger pieces.


This next step can be accomplished one of several ways. You can be a bit spontaneous, like me, and put both pieces of background fabric right-sides together and cut a free-form heart with a sharp pair of scissors. You can also, using your favorite marking implement, draw a heart, or you can trace a heart if that's your comfort level. Cutting free-hand reminds me of grade school, when about this time of year, and before the commercial availability of Valentine greeting cards for school aged children, we folded colored construction paper in half and went to town with safety scissors. Harkening back to those times of creative freedom, I cut my heart halves freehand. It felt good. Go ahead try it.



Lay your cut background fabric side my side and admire your cutting skills. Adjust if necessary. (By cutting both halves of the fabric at the same time, you get mirror images of you heart halves.


Using your sharp scissors, cut little notches around the curved top halves of one of your 1/2 hearts. Keep those snips small and closely spaced together. Repeat on the other side.

Using a hot iron and working on the wrong-side of the fabric, fold and press along the clipped edge.


Here is where the magic happens. I strive to keep the pressed fold at around 1/4", but have allowed for some variability. These are improv pieced at heart, embracing that, I have allowed for each heart, to be unique, like us.

Repeat on other side.

Flip over and spritzing lightly (starch works great here, but any pressing agent, even water will suffice), press flat.


Gently lift the pressed heart cutouts and lay then on top of your heart fabric. Press again, making sure all the previously clipped and pressed seams are to the back.


Using your basting glue, gently lift a segment of the background (light colored in this picture) fabric and apply small dots of glue at the clipped edge. Keep the glue on the folded pressed sections. Lay back down on your heart fabric, press until dry. I find doing this in sections keeps all the fabrics flat. Repeat on other side.


Working carefully from the back clip heart fabric to edge of background fabric, both sides. Press again.


Depending on how dramatic your cut curves are, you may need to gently clip your hearts again. Use your previous clips as a guided clip if necessary, press again.


Now you have your 2 1/2's glue-basted and ready to be sewn.Don't worry about trimming center seams at this point. Trust me on this.

At your sewing machine, and using your 1/4" foot,  sew along the outsides of your hearts halves using the crease created by pressing as your seam guide. Sew slowly all the way around your heart halves, stopping and making adjustments at the curves as needed.  The smaller the hearts, the slower the going.




Take both sewn heart halves to the ironing board and gently press, then spritz and press flat. Even with great care, the block halves will need some trimming before the next step.  So off to the cutting board to trim the center seam allowance only. (We'll deal with squaring up later).



Sew center seam,  matching as closely as possible top and bottom sections of your heart.

Press sewn seam open, spritz if necessary. Admire your work.


Now that your heart is complete, you can decide it's fate. Oh, the irony......

If your quilting your heart, I suggest you do so before trimming the "block" as things will move a bit.



If you hand cut your hearts, no two will be alike, just like each of us.


Finish your block as desired. I bound mine, it is a mini quilt for a special Valentine.

Share the love; if you make a heart please post a photo on IG and tag me @spontaneousthreads and your project #wholeheartedblock



Fabric used in this project is a selection of solids from the Painter's Palette line by Paintbrush Studio, a division of Fabri-Quilt.


7 comments:

  1. I really need to go buy some Elmer's glue; since I need to go by the grocery store this morning, I'll just add it to my list. Would you consider linking this up to Tips and Tutorials Tuesday to help share with others?

    ReplyDelete
  2. Seeing that, I think we can just take those scissors and go

    ReplyDelete
  3. Thank you Stephanie for this great tutorial! I thought you sew curves but this way it's much easier! Have to try! x Teje

    ReplyDelete
  4. Oh, wow! I love this little quilt and love the clever and enticing language you used to describe it. It's terrific, and just in time for Valentine's Day. Thank you!

    ReplyDelete
  5. I'm excited to give this heart a try! Thanks for sharing!!

    ReplyDelete
  6. Great tutorial, thank you for sharing!

    ReplyDelete

If you don't speak up, I won't know what's in your mind…….